-6-
Device Privacy Code
If you want to secure your device from unauthorized access once
your device has gone into key guard mode, you must set up a
privacy code:
1
Press
JUMP
to go to the Jump screen. Press
MENU
then
select
Settings > Key Guard & Security
.
2
Scroll down to the
Privacy Lock
group box. Highlight
, then press the trackball to select it.
3
Enter a three-digit code using the keyboard or the number
pop-up menu:
At the prompt, re-enter your code to verify.
4
A “New Combination Enabled” message appears. Select
OK
.
5
Press
DONE
to save your settings and return to the Jump
screen.
You can still make emergency calls from the key guard
screen, even if privacy code is enabled, by opening the display
then pressing
MENU
+
JUMP
.
Sound Profiles
Each sound profile defines the volume of rings, reminders, and
system sounds. You can have up to eight profiles; six editable
profiles are provided by default. To create a new or modify an
existing sound profile, press
JUMP
, then press
MENU
and
select
Settings > Sound Profiles
. From the Sound Profiles screen
you can also set the behavior of pending alerts and reminders,
and schedule sound profiles.
