The
Functions
switches, and
Setup
options
The function switches feature “momentoggle”. If the buttons are pressed and released
quickly, they will latch on. If pressed and held for more than a second, the function holds
until the button is released. Momentoggle works both ways. The selected function can be
latched on or off with the switches.
Be
careful
with the talkback switch to make sure that it is not latched on when you are
finished addressing the artist! (
“Great Take!” God, I wish that guy could sing in tune,
click
). A talkback remote switch plugged into the jack on the rear panel does not latch in
any mode to keep the producer out of trouble.
Setup options
Pressing the
Mono
and
Alt Spkr
buttons simultaneously enters
Setup
mode. These two
switches flash alternately and the computer is waiting to set the Input Selection mode and
the Analog Monitor gain.
Normally, the
Input Select
buttons will let the user monitor one input at a time. Pressing
the
Sum
switch while in
Setup
mode lights the Sum switch and lets the user listen to any
combination of inputs mixed together after exiting Setup. Pressing the lit
Sum
switch
extinguishes the light and returns the D-Box back to normal monitoring mode.
The
Analog
monitor input is normally set for +4dBu sources. Pressing the
Analog
switch
in
Setup
mode lights the switch and adds 11.7dB of gain to accommodate consumer –
10dBV and other low-level devices. Pressing the lit
Analog
switch while in Setup
extinguishes the light and returns the gain to unity.
Exit
Setup
mode by pressing one of the flashing switches. The D-Box is reset and the
mode changes are saved.
-5-
Summary of Contents for D-Box
Page 8: ...Suggested set ups 8...