background image

 

 

Installation 

The Dan M2 is for use on all types of lifejackets. 
 
The Dan M2 is supplied with a fixing clip. The clip is intended to be placed behind 
a strip of lifejacket material or reflective tape; the light is secured by pressing it 
into the clip.  

 

Light and Fixing clip separated to show material path. 

 
 

It is the responsibility of the lifejacket manufacturer to ensure that the light is 
attached securely and is in the correct position on the lifejacket to provide 
maximum visibility when the wearer is in the water. 

 
Operation 

The DAN M2 is switched on by turning the dome clockwise. 
The light can be turned off by rotating the dome anti-clockwise 
 

 

 

Figure depicts the unit in the ‘OFF’ Position 

OFF 

Summary of Contents for Dan M2

Page 1: ...hing lifejacket light activated manually Daniamant A S Industrivej 24C DK 3550 Slangerup Denmark Tel 45 47 37 38 00 Fax 45 47 37 38 09 Email orders daniamant com www daniamant com www daniamant com Dan M2 lifejacket light Installation and Maintenance Instructions ...

Page 2: ...ip Light and Fixing clip separated to show material path It is the responsibility of the lifejacket manufacturer to ensure that the light is attached securely and is in the correct position on the lifejacket to provide maximum visibility when the wearer is in the water Operation The DAN M2 is switched on by turning the dome clockwise The light can be turned off by rotating the dome anti clockwise ...

Page 3: ...These must be handled correctly Do not dismantle the light assembly Do not make any external electrical connection Do not recharge Do not incinerate Store between 30 C and 65 C The Batteries are hermetically sealed pressurised primary Lithium Manganese cells and as supplied are electrically protected by a solid state device and are environmentally protected by a moulded plastic housing In this con...

Page 4: ...he environment which could otherwise arise from inappropriate waste handling Daniamant s lights are marked with the symbol below which conveys that this waste must be treated separately from household waste To ensure compliance with the WEEE and Battery Regulations the Survivor Location Lights placed on the market in the UK or Denmark should be returned to Daniamant in the UK or Denmark or deposit...

Reviews: