manualshive.com logo in svg

Daniamant Echopilot FLS 3D, Manual

The Daniamant Echopilot FLS 3D, a cutting-edge navigational system, ensures safe sailing for mariners. Enhance your boating experience with interactive 3D underwater imaging. To maximize the potential of this exceptional product, download its comprehensive user manual from our website for free. Experience the full capabilities of Daniamant Echopilot FLS 3D firsthand.

Share
Download
background image

 

 

 

 

FLS 3D

 

Industrivej 24C 

DK-3550 Slangerup 

Denmark 

Tel. +45 4737 3800   

Fax: +45 4737 3809 

info@daniamant.com 

www.daniamant.com

 

 

 

FLS 3D Manual Version 1  

Daniamant A/S 

3

 

 

 

 

 

INDEX 

1.

 

Operating Instructions

 ........................................................................................................................ 4 

2.

 

Setup Instructions

 ................................................................................................................................ 5 

3.

 

How FLS Technology Works

 ............................................................................................................. 6 

4.

 

Guidance on use

 ................................................................................................................................... 7 

5.

 

Installation Instructions

 ...................................................................................................................... 8 

Transducer Installation

 ........................................................................................................................... 8 

Transducer Interface Installation

 ....................................................................................................... 10 

Visual Processor Installation

............................................................................................................... 11 

Keypad Installation

 ................................................................................................................................ 13 

Wiring Overview

 ...................................................................................................................................... 13 

6.

 

Technical Specifications

................................................................................................................... 14 

7.

 

Fault Finding

 ........................................................................................................................................ 15 

 

 

 

Summary of Contents for Echopilot FLS 3D


















Reviews:

No comments

Related manuals for Echopilot FLS 3D

Brands by name

Popular brands

Load more brands