P
I
02 9604 1226 E
I
sales@danielaappliances.com.au W
|
danielaappliances.com.au
PA G E 1 6
TROUBLE
POSSIBLE CAUSE
SOLUTION
FOR THE USER
FOR THE TECHNICAL
SUPPORT SERVICE
Flame on main
burner won’t light
Pressure drop
in gas pipe.
Check inlet gas
pressure, pipe sizes,
contact the gas
utility company.
Burner nozzle
is clogged.
Clean the burner
nozzle (see chapter,
Replacing the main
burner nozzles).
Gas valve damage.
Replace it.
heat in flame
Gas pressure does not
seem strong enough.
Check gas pressure
at appliance regulator.
Adjust if necessary.
Correct size
burner used
Ensure correct size
burner is being used
for the pot.
Turn heat up on
flame to cook food.
Replace it.
Uneven Cooking
Burner is set too high.
Use a lower
temperature.
Incorrect size pot
used for burner.
Place the pot on the
burner appropriate
to the cooking
requirements.
TROUBLESHOOTING HOTPLATES
•
Users are not allowed to perform any maintenance operations on any parts of this appliance.
Maintenance must be carried out exclusively by authorized technical personnel.