Daniela DAN9TY, User Manual

P 

I

 02 9604 1226    E 

 I

sales@danielaappliances.com.au    W

| 

 danielaappliances.com.au

PA G E   1 4

3. 

Set the time by touching the control of the timer 

 Hint: Touch the  “-“  or  “+”  control of the timer once to decrease 

or increase by 1 minute. Touch and hold the  “-“ or  ”+”  control of 

the timer to decrease or increase by 10 minutes.

If the setting time exceeds 99 minutes, the timer will 

automatically return to 0 minute.

5. 

When the time is set, it will begin to count down immediately. 

The display will show the remaining time and the timer 

indicator flash for 5 seconds.

NOTE: The red dot next to power level indicator  

will illuminate indicating that zone is selected. 

6. 

When cooking timer expires, the corresponding cooking zone 

will be automatically switch off and show “H”.

Setting the timer to turn more than one cooking zone off

1. 

If more than one heating zone use this function, the timer indicator will show the lowest 

time. (e.g. zone 1# setting time of 3 minutes, zone 2# setting time of 6 minutes, the timer 

indicator shows  “3”).

NOTE: The flashing red dot next to power level indicator means the timer indicator is 

showing time of the heating zone. If you want to check the set time of other heating 

zone, touch the heating zone selection control. The timer will indicate its set time.

2. 

When cooking timer 

expires, the corresponding 

cooking zone will be 

switch off automatically 

and show “H” . 

NOTE: If you want to 

change the time after the 

timer is set, you have to 

start from step 1

(set to 6 minutes)

(set to 3 minutes)