Manual
IQ..Q744
Danish Design
Use of the chronograph:
•
Press button “A” ; the chronograph will start.
•
Press button “A” again; the chronograph stops.
•
To reset, press button “B”.
•
Intermediate times can be read by pressing button “B” once while the
chronograph is running. Press button “B” again to return to the total counted time.
Setting the time:
•
Pull out the crown completely; By turning the crown the time can be set.
•
By pulling out the crown just one step, the date can be set.
Aligning the chronograph:
After a battery-change for instance it’s possible that the seconds-counter isn’t on the
“0” position. To adjust this,
•
Pull out the crown completely;
•
Press button “A”. The 1/10
th
seconds' counter will move. Keep pressing it till the
counter reaches “0”.
•
Press button “B” to simultaneously set the seconds- and minutes counter. Once
they're both on the “60” position, push the crown back to it's original position.
Explanation of dials and counters:
•
Top : the 1/10
th
seconds counter
•
Left : Minutes counter
•
Bottom : the seconds-counter
•
The central hand is the seconds-hand
Cal. VD 57
