DANLERS Limited, Vincients Road, CHIPPENHAM, Wiltshire, SN14 6NQ, UK.
Telephone: +44 (0)1249 443377 Fax: +44 (0)1249 443388 E-mail: sales@danlers.co.uk
www.danlers.co.uk
Company Registered Number 2570169 VAT Registration Number 543 5491 38
DAT008
9
CEFLPIR
11/11/2020
PRECAUTIONS AND WARRANTY
This product conforms to BS EN 60669-2-1 and
BS EN 55015.
Please ensure the most recent edition of the
appropriate local wiring regulations are observed
and suitable protection is provided e.g. a 10 amp
circuit breaker and voltage surge protection.
Please ensure that this device is disconnected
from the supply if an insulation test is made.
Other DANLERS Product ranges
-
Remotely adjusted PIR occupancy switches
-
Manually adjusted PIR occupancy switches
-
Daylight linked dimming controls
-
Photocell switches
-
Time lag switches
-
Outdoor security switches
-
Dimmer switches inc. LED dimming
-
HVAC controls
-
Radio remote (RF) controls
Please call for more information or visit our website.
This product is covered by a warranty which
extends to 5 years from the date of manufacture.
MADE IN THE UK
CEFL PIR
Ceiling Flush Mounted PIR Occupancy Switch
(Presence detection)
Input: 220-240 Vac 50Hz
INPUT:
Voltage:
220 - 240Vac
Frequency:
50Hz
Max. mains current:
0.05A
LOADING:
Resistive loads:
6 amps (1500W)
Fluorescent:
6 amps (1500W)
Electronic and wire
wound transformer:
6 amps (1500W)
LED Drivers and LED
lamps and fittings:
3 amps (1500W)
CFL and 2D lamps:
2 amps (500W)
Fans:
1 amp (250W)
Minimum load
2W resistive, suitable
for most energy
saving lamps, LEDs
and emergency
fittings.
OPERATING CONDITIONS:
The temperature difference between the
detection target and the background must
be at least 4 °C.
Ambient
temperature:
-20... +40 °C (lout
0.05 A)
Max. case
temperature:
+70 °C
Storage
temperature:
-25... +75 °C
Max. relative
humidity:
0... 80%, non cond.
CONNECTORS:
Terminal block
Wire size:
0.5mm
2
- 2.5mm
2
solid or stranded
Wire strip length:
6-7mm
Tightening torque:
0,4 Nm/4 Kgf.cm
MECHANICAL DATA:
Dimensions:
72mm x 72mm x
68mm
Weight:
246g (unpacked)
Degree of
protection:
IP20
Protection class:
Built-in Class 2
Material (casing)
Flame-retardant
polycarbonate
Finish / Colour
Matt /White (RAL
9003)
Protection class:
Built-in Class 2
CONFORMITY AND STANDARDS:
EMC emission:
EN60669-2-1:2004
inc. A12:2010
EMC immunity:
EN60669-2-1:2004
inc. A12:2010
Safety:
EN60669-2-1:2004
inc. A12:2010
Environment:
Complies with
WEEE and RoHS
directives
VARIANTS - LOW VOLTAGE:
DANLERS also design and manufacture an
extensive range of Ceiling Flush Mounted
PIR Occupancy Switch variants some of
which are listed below:
CEFL PIR 12VAC
CEFL PIR 12VDC
CEFL PIR 24VAC
CEFL PIR 24VDC
12V or 24V (ac or
dc) operation
CEFL PIR 12VACVF
CEFL PIR 12VDCVF
CEFL PIR 24VACVF
CEFL PIR 24VDCVF
12V or 24V (ac or
dc) operation Volt
Free contacts
TECHNICAL DETAILS
WIRING DIAGRAMS
L
load
Note 1: Optional manual
wall switch for overriding off.
Note 2:
Alternative
position for
optional
wall switch
N
230 VAC
N
SL
L
L
Note 1: Optional manual
wall switch for overriding off.
N
230 VAC
N
SL
L
load
N
SL
L
Note 2:
Alternative
position for
optional
wall switch
CEFL PIR
CEFL PIR
CEFL PIR
L
load
Note 1: Optional manual
wall switch for overriding off.
Note 2:
Alternative
position for
optional
wall switch
N
230 VAC
N
SL
L
L
Note 1: Optional manual
wall switch for overriding off.
N
230 VAC
N
SL
L
load
N
SL
L
Note 2:
Alternative
position for
optional
wall switch
CEFL PIR
CEFL PIR
CEFL PIR
DIAGRAM D (WIRING A SINGLE PIR)
DIAGRAM E (WIRING IN PIRS IN PARALLEL)
PLEASE READ THESE INSTRUCTIONS BEFORE INSTALLING THE PRODUCT
