FOR TECHNICAL QUESTIONS, CALL (877)432-6627
5
21.
ONLY TRAINED OPERATORS
should operate this lift. All non trained personnel should be kept away
from work area. Never let non trained personnel come in contact with, or operate lift.
22.
USE LIFT CORRECTLY.
Use lift in the proper manner. Never use lifting adapters other than what is
approved by the manufacturer.
23.
DO NOT
override self closing lift controls.
24.
REMAIN CLEAR
of lift when raising or lowering vehicle.
25.
CLEAR AREA
if vehicle is on danger of falling.
26.
ALWAYS ENSURE
that the
o
are engaged before any attempt is made to work on or
near
vehicle.
27.
DRESS PROPERLY.
Non skid steel toe footwear is recommended when operating lift.
28.
GUARD AGAINST ELECTRIC SHOCK.
This lift must be grounded while in use to protect the operator
from electric shock. Never connect the green power cord wire to a live terminal. This is for ground only.
29.
DANGER !
The power unit used on this lift contains high voltage. Disconnect power at the receptacle
before performing any electrical repairs. Secure plug so that it cannot be accidentally plugged in
during service.
30.
ALWAYS WEAR SAFETY GLASSES.
Everyday eyeglasses only have impact resistant lenses. They are
not safey glasses.
31.
MAINTAIN WITH CARE.
Keep lift clean for better and safe performance. Follow manual for proper
lubrication and maintenance instructions. Keep control handles and / or buttons dry, clean and free
from grease and oil.
32.
STAY ALERT.
o ow
r
o r
w r o
r o
o r wor
33.
CHECK FOR DAMAGED PARTS.
Check for alignment of moving parts, breakage of parts or any
condition that may affect its operation. Do not use lift if any component is broken or damaged.
34.
NEVER
remove safety related components from the lift. Do not use lift if safety related components are
damaged or missing.
35.
NOTE:
If attachments, accessories, or configuration modifying components that are located in
the load path, affect operation of the lift, affect the lift electrical listing or affect intended vehicle
accommodation are used on this lift and, if they are not certified for use on this lift, then the
certification of this lift shall become null and void. Contact Dannmar Equipment for information
pertaining to certified attachments, accessories, or configuration modifying components.
Summary of Contents for D-10 Series
Page 1: ...A ND VALIDATE D Rev D 06202018 P N 199824...
Page 46: ......
Page 47: ...D10ACX...
Page 52: ...Dannmar R EQUIPMENT...
