DB-70 Automatic Wheel Balancer
44
P/N 5900261 — Rev. A1 — January 2021
h.
Enter the
a2
and
d2
parameters using the
Inner measuring arm held to the center plane
until you hear a beep.
Note
: If the values appear incorrect you can
turn off the power to reset the machine
and start the process over.
i.
Lower the Tire Cover, or start the cycle
manually. The Wheel spins briefly.
j.
When the test values appear in both
windows, use the brake pedal to bring the
Wheel to a stop and lift the Tire Cover.
k.
Check the value on the Inner Window.
•
If the value is
00
, you do not need to add weight to the Inner Plane.
•
If there is a value—
.25
, for example—you need to add that amount of Weight to the Inner
Plane.
l.
To add Weight, break off the appropriate number of Adhesive Weight sections.
m.
Manually turn the Wheel, watching the indicators to the right of the Inner Window.
The Indicators light up or go out as you move the Wheel. When all of the Indicators light, press the
Brake Pedal to hold the Wheel at that position.
n.
Pull the backing off the Adhesive Weights, then add the Weight at Top Dead Center on the
Wheel (12 o’clock high) on the Inner Plane
a1
position.
If you are adding Adhesive Weight with multiple sections, center them on Top Dead Center.
o.
Check the value on the Outer Window:
•
If the value is
00
, you do not need to add Weight to the Outer Plane.
•
If there is a value—
.25
, for example—you need to add that amount of Weight to the Outer
Plane.
p.
To add Weight, break off the appropriate number of Adhesive Weight sections.
q.
Manually turn the Wheel, watching the indicators to the left of the outer window.
The Indicators light up or go out as you move the Wheel.
r.
When all of the Indicators are lit, press the Brake Pedal to hold the Wheel at that position.
s.
Pull the backing off the Adhesive Weights, then add the Weight at Top Dead Center on the
Wheel (12 o’clock high) on the
a2
position on the center plane.
If you are adding Adhesive Weight with multiple sections, center them on Top Dead Center.
t.
Release the Brake Pedal.
u.
Lower the Tire Cover to spin the Wheel again.
v.
The Wheel is balanced when both the Inner and Outer
Windows show
0.0
.
It may take more than one time adding weights to get to
0.0 | 0.0
.
Summary of Contents for DB-70
