DB-70 Automatic Wheel Balancer
20
P/N 5900261 — Rev. A1 — January 2021
Final Checklist
Make sure the following items have been completed
before
putting the Wheel Balancing Machine into
normal operation:
☐
1.
Review the Installation Checklist.
Make sure that all of the steps on the
☐
2.
Test the power source.
Wheel Balancing Machine functions require electric power. Turn the
on-off rocker switch to the on position. If the display panel indicators light, you have power.
☐
3.
Check the Anchor Bolts.
If the Wheel Balancing Machine is bolted down, make sure the
Anchor Bolts are in position and tight.
☐
4.
Leave the Manual with the owner/operator.
Questions are going to come up that only
the Manual can answer. Plus, new Operators will need to study it before to balance wheels. The
Manual needs to be kept near the Wheel Balancing Machine at all times.
Operation
This section describes how to use your Wheel Balancing Machine.
It displays and describes the main components and processes involved in mounting a wheel on the Shaft and
balancing it, followed by the necessary procedures for each step in the process.
⚠
DANGER
Being in close proximity to a Wheel Balancing Machine is a serious endeavor with
potentially life-threatening risks. Only trained, authorized, supervised personnel may
be within 30 feet of the Wheel Balancing Machine while it is in use.
Do not
assume you are going to be safe using the Wheel Balancing Machine
this time just because nothing happened last time.
Usage Precautions
Keep the following in mind while you use your Wheel Balancing Machine:
•
Make sure all Operators receive specific training in Wheel Balancing before they are allowed to use
the Wheel Balancing Machine, that their training is verified through a testing program, and that all
training is documented. All others, including children and untrained personnel,
must
be kept at
least 30 feet away from the Wheel Balancing Machine while it is in use.
•
Make sure new Operators are trained and supervised in the use of the Wheel Balancing Machine.
•
Never balance
damaged
Tires or Wheels.
•
When using the Wheel Balancing Machine, protect your hands; there are multiple pinch point
dangers on the unit.
Do not rest your hands on any part of the Wheel Balancing Machine while
using it.
•
You
must
wear OSHA-approved (publication 3151) Personal Protective Equipment at all times
when installing, using, maintaining, or repairing the Wheel Balancing Machine. Leather gloves,
steel-toed work boots, eye protection, back belts, and hearing protection
are mandatory
.
•
When using the Wheel Balancing Machine,
the operator must
wear
ANSI-approved
eye protection
at all times
: safety glasses, a face shield, or protective goggles.
Summary of Contents for DB-70
