DLR-6/6P Low-Rise Scissor Lifts
13
P/N 5900254 — Rev. A — September 2020
Assemble the Tow Cart (DLR-6P only)
The Tow Cart, which is used only with the DLR-6P, lets you move the Lift to other locations.
The following drawing shows how to set up the Tow Cart.
Raise the Platforms Off the Base
You need to raise the Platforms off the Base to access two of the three Anchor Bolt holes
(Anchoring for DLR-6 only).
Be sure to leave the Lift engaged on a Safety Lock when you
raise it.
⚠
WARNING
We strongly recommend using
at least two people
to lift the Platforms off their
Bases: one person to hold down the Base and one person to operate the Forklift or
Shop Crane to raise the Platforms.
Use care when raising the Platforms off
the Base
.
To lift the Platforms off the Base
:
1.
Use a Forklift or Shop Crane to raise the Platform off of its Base.
Make sure to hold down the Base while you raise the Platform.
Tip
Once the Platform and Base are separated by more than half an inch (~13 mm), you
can put industrial slings (straps) around each end to continue raising the Platform off
the Base.
2.
When the Platform gets above the top Safety Lock, lower it back down onto the top Safety Lock.
Do
not
raise the Platform a random distance; leave it on the top Safety Lock.
⚠
WARNING
Do not continue with the installation without first confirming that the Lift is securely
engaged on a Safety Lock.
Summary of Contents for DLR-6
