2
5.
Boot ROM Installation
The PCI 10/100TX Boot ROM is available from your dealer.
To add the Remote Boot feature, insert the Boot ROM into
socket as shown in Fig. 2. Align the notch and pins on the
Boot ROM with the notch and pin receptacles on the ROM
socket. Gently push the Boot ROM into the socket, being
careful not to bend the pins.
PCI 10/100TX/Boot ROM is auto-configured with PCI slot
after your PC is initialized. The message is:
RPL – ROM – ADR
: 0040-C7xx-xxxx (Node ID)
RPL – ROM – IRQ
: x
(PCI slot IRQ no.)
RPL – ROM – PIQ : x000 (PCI slot IO address)
ADR is the Ethernet Node Address of PCI 10/100TX.
IRQ, PIO are PCI slot configuration, which is configured by
your system PCI BIOS.
