30
video source to the selected window.
Tour setup:
In the Input and output setup interface, user may set tour time. When input
the customized folder and the channel amount on the folder is larger than the output
channel amount, system enables tour automatically. See Figure 2-13.
Figure 2-13
Click the control tour of the
or click the TOUR on the keyboard, user may close
the tour of the whole screen. Click Control tour or TOUR button again, user may enable
tour function again.
Please note:
On the Apply mode, all matrix setups can be changed automatically once user
change the keyboard setup.
On the output all mode, except window split mode, the rest setup can only be applied
to the matrix end once user set on the keyboard and click output video button.
Click save scheme button, user may save current scheme setup. If user have not save,
click reload button, user may go back to previous setup.
Click Close video button, user may close splicing video on the matrix end.
2.4.1.2 PTZ Control
In the PTZ control mode, user may use the network keyboard to control the PTZ operation.
The interface is the same as when user are controlling via the Web. User may view the
video from the control channel on the left pane and the PTZ control interface on the right
pane.
Click
button, user may go to PTZ interface. Please refer to chapter 2.3.5.5 for
detailed information.
