9
3
．
Integrated full range pan-tilt
a. Pan rotate 360º, tilt rotate -90º
～
90º
b. Pan rotate may realize 0
～
50
°
/s continuous shift adjust, tilt rotate may
realize 0
～
50
°
/s continuous shift adjust
c.
Low speed steady rotate, little noise, clear and steady image
d.
Reach full range no spot monitoring, exact orientation be ±0. 1°.
4
．
High Intelligence
a. May save at most 128 pre-setting points
b. Pan scanning between two points. User may choose the scanning speed
and direction. Thermal camera could scan about 180°between two points
via menu.
c. Six tracking paths may be programmed: Each path has 20 pre-setting
points. User may separately set staying time between two points.
d. Self-inspection function: The system may remember the PTZ paths in 40
seconds and imitate; it may finish the action according to User's
operation; and data saves when power off.
e. Character adding function: Screen may show camera’s address and
number of presets.
f. Short/Long focal length shift function. The night vision camera may adjust
its pan/tilt shifting speed automatically according to the focal length. The
larger magnification the slower shifting speed, to make sure an accurate
search and lock the target; the smaller magnification the faster shifting
speed, to make sure find the target.
2.Menu Setup Instruction
1
．
Menu basic operation
1.1
Use keyboard or matrix to call preset No. 64
to enter main menu.
1.2 A
fter the menu is on the screen, using
keyboard, User may control joystick to move
cursor, turn up or down to move cursor to the
MAIN MENU
= = = = = = = = = = = = = = = =
1 DISPLAY SETUP
2 CAMERA SETUP
3 CONTROL SETUP
4 THERM IMAGE SET
5 PROGRAM
6 NTSC/PAL CAMERA
7 CAM DEFAULT SET
8 RESET PT
9 EXIT
