40
40
40
40
3.3.2. Schedule
Set recording schedule for each camera. First, select the camera to set schedule, or “All”.
Recording can be set by each hour from 00 through 23 a day.
NO COLOR (Off)
“Off” means no recording. Even though user set recording frames and on in “CAMERA”, the
system will not record anything if user sets “OFF” in SCHEDULE.
YELLOW COLOR (Continuous Recording)
In continuous recording mode, the system records all the time as set by “CAMERA”.
GREEN COLOR (Motion-Detection Recording)
In this mode, the system records only when motion is detected in the motion area, and stops
recording when motion is not occurred. In addition, user can make motion recording configuration
in “MOTION ALARM” of “DEVICE” menu.
If user sets “OFF” in “MOTION ALARM” of “DEVICE” and sets “MOTION” in “SCHEDULE”, then
the system will record when motion is detected but motion alarm is not activated.
ORANGE COLOR (Sensor-Activated Recording)
In sensor mode, the system will record when sensor is triggered only during dwell time as set in
“SENSOR” of “DEVICE” menu.
If user sets “OFF” in “SENSOR” of “DEVICE” and sets “SENSOR” in “SCHEDULE”, then the
system will not record anything even though a sensor is triggered.
SKY BLUE COLOR (Cont Motion Detection Recording)
The system records all the time by “continuous” as set by “CAMERA” of “RECORD” but will
switch recording mode to motion configuration as made by “MOTION ALARM” of “DEVICE” if
motion is detected in motion area. The system also will notify “motion event” message to Remote
Manager PC over the network.
If user sets “OFF” in “MOTION ALARM” of “DEVICE” and sets “CONT + MOT” in “SCHEDULE”,
then the system will record with continuous recording mode even though motion is detected in
motion area.
DARK ORANGE COLOR (Cont Sensor-Activated Recording)
The system records all the time by “continuous” as set by “CAMERA” of “RECORD” but will
switch recording mode to sensor configuration as made by “SENSOR” of “DEVICE” if a sensor is
triggered during dwell time. The system also will notify “sensor event” message to Remote
Manager PC over the network.
If user sets “OFF” in “SENSOR” of “DEVICE” and sets “CONT + SENS” in “SCHEDULE”, then
the system will record with continuous recording mode even though a sensor is triggered.
PINK COLOR (Motion Det Sensor-Activated Recording)
The system does not record in normal operation but records only when motion is detected as set
by “MOTION” of “DEVICE” and a sensor is triggered as set by “SENSOR” of “DEVICE”.
If user set “OFF” in both “MOTION” of “DEVICE” and “SENSOR” of “DEVICE”, then the system
will not both record and notify to Remote Manager PC or Central Management PC.
Caution
Dark Blue Color
The data recorded during DST (Daylight Saving Time) will be indicated in Dark Blue
color in Intelli-Search Bar on playback mode.
Summary of Contents for DLW5400
Page 3: ......
