50
50
50
50
END CHARACTER : Input the assigned character to terminate display and save.
LINE BREAK
: Set line-break character.
It should be 16 digits HEX Value.
> [CRLF] / [CR] / [LF] : The character that is generally used in ASCII-type POS
Please contact POS manufacturer for details.
> [Custom] : It can be used except for above general character.
Only number(0 ~ 9) and alphabet(A ~ F) can be used and
even numbers should be input.
ex) Hexadecimal : 0x0D 0x0A
→
0D0A
SAVE : Select to save POS data.
DISPLAY LINE : Set the number of line to be displayed on the screen.
CLEAR TIME : Set the time period to be displayed on the screen.
The data will be deleted if no more data is input after the
setting time here. If it is set as “0”, the data will not be
deleted.
LIVE : Select to display POS data in the live mode.
PLAYBACK : Select to display POS data in the playback mode.
PORT SETUP : Setup condition for RS-232 communication.
Click to display the screen as below. All the values must be
Set same as the POS equipment.
PROTOCOL : Assign protocol type.
> [TEXT-IN] : Text input type protocol.(ASCII character)
> [SDVR-POS] : Manufacturer’s own protocol.
Please contact your POS dealer for details.
CONNECT TYPE : Setup communication port type.
> [COM] : COM(RS-232) port.
> [USB-COM] : USB to COM (RS-232) port device.
BAUDRATE : Set BAUDRATE.
PARITY : Set PARITY.
DATABIT : Set DATABIT.
STOPBIT : Set STOPBIT.
Summary of Contents for DLW5400
Page 3: ......
