4. Operation Description
4.1. Factory Default Settings
Factory default settings are set as follows:
• IP address: 192.168.
xx
.
yy
(refer to 2.3 Serial Number / MAC Address)
• Mask: 255.255.0.0
• Gateway: 192.168.0.1
• User ID: root
• Password: pass
xx yy xx yy
MAC address = 00-13-23-01-23-45
→
IP address = 192.168.35.69
To Convert Hexadecimal numbers to Decimal numbers, use PC calculator.
In Calculator Menu:
1.
Click View and select Scientific version
2.
Next select Hex to convert digits
xx
- use keypad input number ex: 23
3.
Next select Dec and get result = 35
4.
Repeat for digits
yy
– select Hex, input number ex: 45
5.
Next select Dec and get result = 69
To perform the FD (Factory Default) initialization:
1.
Turn on the power (The status LED is on).
2.
Press and hold the Reset button within 1 second.
3.
Release the Reset button after 3 seconds.
4.2. Rebooting
To reboot the system:
1.
While the camera is in use, press and hold the Reset button. (Both Status
and Network LEDs are on.)
2.
Release the Reset button after 3 seconds.
Convert the Hexadecimal number to Decimal number
