P
AGE
2
46033-1098 <90-00011>
ORDERING INFORMATION
NOTE: This section lists the different options available for this product. To order any of the avail-
able options, contact Dantel Inside Sales through our toll-free number, 1-800-432-6835.
OPTION NUMBER
FEATURES
B11-46033-01
E-System Adapter (Interfaces TASC, SCOTS, TCAS, NMA)
A11-46033-02
E-System Adapter (Interfaces NMA)
B11-46033-11
E-System Adapter (Interfaces SCC)
GENERAL DESCRIPTION
T
he 46033 E-System Adapter module provides an interface
between Dantel’s 460 Alarm and Control System (460 ACS)
and the following alarm centers:
NMA
Network Management and Analysis
TASC
Telemetry Alarm Surveillance Center
SCOTS
Surveillance and Control of Transmission Systems
TCAS
T-Carrier Administration System
SCC
Switching Control Center
To the alarm system, the 460 ACS appears like an E2, E2A, or
E2AA alarm remote.
The 46033 is available in three options. Refer to the Ordering
Information section.
Each 46033 has a capacity of two E-System addresses, but they
must be consecutive. Each address represents 64 displays of
alarm information received from two 46020 Multiple Alarm
Processor (MAPs) or a total of 128 displays (four MAPs) for both
addresses. Each display represents 64 alarm points.
-01, -02 Options
7680 points (the first four displays of each address are used for
new and existing alarms)
NOTE:
The difference between the -01 and the -02 is in how it reports
MAP failures. If a 46033-01 is configured (with switches) to
poll a MAP that does not exist, a device failure is not reported
to the Alarm Center.
Conversely; if a 46033-02 is configured (with switches) to poll a
MAP that does not exist, a device failure is reported to the
Alarm Center.
Both options will report a device failure to the Alarm Center if
an in-service MAP fails.
UPDATED
UPDATED
