P
AGE
10
41071-1199 <90-00037>
2. Complete the cable wiring from the switch box.
Wire the cable from the switch box to the display box as follows,
routing the wiring through the small hole in the bottom of the box
(refer to Fig. 7).
♦
Blue/white wire to pin 1 of SW1
♦
Orange/white wire to pin 2 of SW1
♦
White/orange wire to pin 3 of SW1
♦
White/green wire to pin 4 of SW1
♦
Green/white wire to ground pin (+48V)
♦
White/blue wire is not used.
T
o install the 41071 Alarm Display Unit, refer to Fig. 7, and
follow these steps:
1. Remove the cover.
Take the cover off the display box to gain access to the wire wrap
pins inside.
F
IG
. 7 - W
IRE
W
RAP
P
IN
L
OCATIONS
INSTALLATION
MAJ
MIN
FUNCTION
Critical
Major
Minor
COLOR
Red (top)
Red (middle)
Amber (bottom)
RELAY
K1
K2
K3
CONTINUED
. . .
