37
062
36
7 •
V
ersi
on
1.
0 •
14
.02
.2
011
Technical data
Introduction
Technical data for the AC-M5 W MKII unit.
Performance
characteristics
The air conditioner has a maximum cooling capacity of 4.7 kW.
When the relative humidity of the air inlet is high, the air can be cooled below its dew
point and thus condense some of the water vapour to free water. This requires a certain
amount of latent cooling but provides a dehumidification process, which is an important
factor in comfortable air supply conditions.
The operating range is between 20 and 60 °C approximately and is controlled by the
HP-pressure switch. In relatively dry locations the air temperature drop will depend on
inlet conditions.
Data
Data and dimensions on the cabinet are shown in the following table:
Specification
Value
Voltage/PH/frequency
230 V 1 PH/50 Hz
Electric consumption, max.
2.4 kW/11.2 A
Cooling capacity, max.
4.7 kW
Heating capacity (option)
2.0 kW/8.6 A
Airflow low, evaporator
420 m³/h
Airflow high, evaporator
900 m³/h
Airflow, condenser
1475 m³/h
Refrigerant/Load R134a/1.4
kg
Max. refrigerant pressure
28 Bar
Operation temp. range
20-60 °C
Weight 79
kg
Noise level (1 m) low speed
49/48
*)
dB(A)
Noise level (1 m) high speed
64/63.5
*)
dB(A)
*)
With/without compressor active
