6/15
0
6
2
1
7
6
•
V
e
rsi
o
n
2
.2
•
1
6
.0
8
.2
0
11
How to install a condensate pump in a CDT water contai-
ner
Functional
description
With a condensate pump mounted in the water container the dehumidifier can be in
continuous operation. There will be no need to empty the water container manually
from time to time.
Parts
The kit consists of the following
parts:
Pump with assembled brack-
et
2 screws, 2 nuts and 2 star
washers
10 meter hose (Ø 7/10 mm)
with premounted joint
Tools
No need for special tools when mounting. If the pump is ordered with dehumidifier CDT,
the pump can be installed at the factory if you should so wish.
Warning
The dehumidifier must be turned off before starting the mounting procedure below.
Procedure
Follow this procedure to mount the pump:
Step
Action
1
Turn off the dehumidifier and take
out the water container
Continued overleaf
EN
