en
it
de
es
fr
nl
pt
da
fi
no
sv
pl
ru
cs
hu
sl
tr
hr
lt
lv
et
ro
sk
bg
uk
bs
el
zh
►►1. DESCRIPTION
(Pic. 1)
This series of warm air heaters is particularly suited to heat-
ing closed areas, such as warehouses, shops and homes.
These heaters comply with the current European directive.
►►2. SAFETY INFORMATION
IMPORTANT: This heater is not suitable for use by
persons (including children) with reduced physical,
sensory or mental capacities or with lack of experi-
ence or knowledge unless supervised by a person
responsible for their safety. Children must be super-
vised to make sure they do not play with the heater.
IMPORTANT: In order to prevent any risk, even if pow-
er supply mains disconnection is foreseen, all clean-
ing, maintenance and repair operations requiring ac-
cess to dangerous parts (e.g. replacing the damaged
power supply cable), must be carried out by the man-
ufacturer, its technical support centre, a person with
similar qualification.
IMPORTANT: Comply with all local legislation and cur-
rent regulations when using the heater.
►1.1. Heaters used near tarpaulins, curtains or other simi
-
lar covering materials must be a safe distance from them. It
is advised to use fire-proof covering material.
►1.2. Keep the heater a safe distance from humidity, water
and atmospheric agents to prevent serious damage to the
heater.
►1.3. Keep the hot parts of the heater a suitable distance
from inflammable or thermolabile materials (including the
power supply cable).
►1.4. Never move, handle or conduct maintenance on the
heater when it is hot, connected to the mains or in operation.
►1.5. Avoid fire hazards by placing the hot or functioning
heater on a steady level surface.
►1.6. Keep animals at a safe distance from the heater.
►1.7. Power on the heater only with a current which has
the voltage and frequency values specified on the heater's
identification plate.
►1.8. Make sure the heater is only connected to suitable
mains with a differential switch and suitable earthing.
►1.9. If the power supply cable is damaged, it must be re
-
placed by the support centre to prevent any risk.
►1.10. Disconnect the heater from the mains power supply
when not in use.
►1.11. Always disconnect the heater from the mains if tem
-
porarily left in unsafe conditions and make sure it cannot be
used.
►1.12.
Never block, not even partially,
the heater's air vent
or the air outlet.
►1.13.
Avoid any kind of ducting, either at the air inlet or
outlet.
►1.14. Do not cover the heater while in operation, it might
overheat.
►1.15. Ask the support centre to check that the heater is
working properly at least once a year and/or as required.
THE MANUFACTURER DECLINES ANY LIABILITY FOR
DAMAGE/INJURIES TO PROPERTY/PERSONS DERIV-
ING FROM IMPROPER USE OF THE HEATER.
ONLY SPECIALISED PERSONNEL AUTHORISED BY THE
MANUFACTURER CAN PERFORM WORK ON THE HEAT-
ER.
►►3. UNPACKING
WARNING: The packaging material is not a toy. Keep the
plastic bag out of the reach of children; danger of suf-
focation!
►2.1. Remove all packaging material used to deliver the
heater and dispose of it in compliance with current stand-
ards.
►2.2. Remove all items from the packaging.
►2.3. Check for any damage incurred during transport. If
the heater appears damaged, immediately inform the dealer
from whom it was purchased.
►►4. ASSEMBLY
These heaters are equipped with handles, supports, etc.
depending on the model. These parts, which come with the
relative nuts and bolts, are in the heater's packaging. In any
case, many heater models are already assembled by the
manufacturer and are therefore ready to use.
If the heater is not equipped with a power supply cable,
ELECTRICAL CABLES MUST BE USED WITH COMPO
-
NENTS IN ACCORDANCE WITH LOCAL AND/OR NA
-
TIONAL ELECTRICAL DIRECTIVES. THE MANUFACTUR
-
ER DECLINES ANY LIABILITY FOR DAMAGE/INJURIES
TO THE HEATER AND/OR PERSONS DERIVING FROM
INCORRECT CONNECTION OF THE POWER SUPPLY
CABLE.
►►5. CONTROL PANEL
(Pic. 2)
A. Room thermostat knob;
B. Power selector;
C.
“RESET” button (if present).
►►6. OPERATION
WARNING: You are required to read, understand and fol-
low the ''INFORMATION ON SAFETY'' before starting the
heater in order to use it correctly and avoid risks.
WARNING: Make sure the power supply cable is intact
and that the features of the mains power supply match
the ones on the heater's technical data plate.
IMPORTANT: READ AND UNDERSTAND THIS OPERATIONAL MANUAL PRIOR TO
ASSEMBLING, STARTING UP OR CONDUCTING MAINTENANCE ON THIS HEATER. USING
THE HEATER INCORRECTLY CAN CAUSE SERIOUS OR FATAL INJURIES. KEEP THIS
MANUAL FOR FURTHER REFERENCE.
