Pa
ge
13
GENERAL
INFORMATION
HANDLING
Handling must be performed by properly equipped personnel. If a fork-lift is used, pitchfork the
machine in the lower part using the appropriate ways in the wood bedplate.
Shipping and handling must be carried out with extreme care to avoid damage to the unit and
danger to the persons involved.
During transportation and handling, it is forbidden to stand near the unit.
Use forklift forks with a minimum length equal to the width of the machine.
If belts or ropes are used, a rocker arm must be used (not included) to prevent the pressure
exerted by the same from damaging the structure of the unit.
Should it be necessary to place more than one unit on top of each other, observe the index
indicated on the packaging itself and be very careful when aligning the packages so as not to
create unstable stacks.
If the device needs to be moved by hand, make sure that there is enough workforce available in
proportion with the weigh indicated in the section "DIMENSIONS AND WEIGHT" and depending
on the distance to cover.
We recommend the use of personal protective equipment (PPE).
