Moreover, we suggest:
▪
avoiding or having just few horizontal ducts, which should anyway be upward raked;
▪
using metal pipes featuring a smooth internal surface and being capable of resisting to the
thermal and chemical stress caused by the combustion products, with the same diameter as the
connector of the machine or with a bigger diameter;
▪
avoid narrow bends and section reductions;
▪
having a trap to take and analyse the combustion products;
▪
properly anchoring the flue gas discharge pipe;
▪
having a proper end cover to prevent rainwater seepage into the machine and significant friction
losses.
▪
The smoke pipe connecting the machine to the flue should be easily dismantled; this is a basic
condition to enable the personnel to easily control and clean inside the heat exchanger
INSTALLATION
INFORMATION
COMBUSTION AIR
▪
The appliance must be installed in accordance with the regulations in force and be used only in
a sufficiently ventilated area.
▪
Check that the combustion air inlet is always free from any obstacles (leaves, sheets of paper,
nylon pieces, etc.)
▪
Proper air openings should be made, in compliance with the relevant Standards
INSTALLATION
INFORMATION
DIESEL BURNER ASSEMBLY
The burners are supplied, on request, disassembled and in separate packages.
The installer is in charge of mounting, electrically connecting and setting the burner. These
operations should be carried out only by qualified and skilled personnel, carefully complying with
the burner and supply ramp manuals (provided together with the devices).
▪
It is mandatory to install only burners with certificates
.
▪
The data for the RIELLO brand burners are indicative as they can be subject to change without
notice. We recommend always consulting the latest version of the burner documents.
▪
The availability of new burner models is in continuous evolution. For specific needs, consult the
Manufacturer.
P
age
.
19
