INSTALLATION
INFORMATION
ELECTRICAL POWER SUPPLY
In types 1 and 2, single-phase, for the electrical connection of the main power supply, use the
special outlet - plug positioned externally.
In type 3, three-phase, for the electrical connection of the main power supply, use the section of
cable coming out of the electrical panel.
1.
Three-pole outlet-plug
2.
Section of electrical cable
INSTALLATION
INFORMATION
WIRING DIAGRAM REFERENCE
An easily readable paper copy of the wiring diagram is placed in the electric panel or in the
document bag
and it is an integral part of this instruction manual.
We recommend keeping it carefully together
with the other documents.
Should this copy be mislaid, ask the Manufacturer for a duplicate, notifying the serial number of the
appliance and the wiring diagram code specified below.
TYPE
1
2
2
Wiring diagram
code
7328400
7328400
10052712-TC
▪
In case of doubts, do not perform any operation on the machine. Please, contact the
Manufacturer for further clarifications.
▪
In accordance with the Standards regarding the installation of electrical components, a device
that ensures disconnection from the mains with an opening distance between contacts that
guarantees complete disconnection in overvoltage conditions III (Standard EN 60335-1) must
be included.
Pa
ge.
21
