INSTALLATION
INFORMATION
INDICATORS
Voltage presence indicator:
Positioned on the control panel, it consists of a green indicator light which comes on when there is
electric voltage present.
LIMIT thermostat intervention indicator:
Positioned on the control panel, it consists of an orange indicator light which comes on when the
LIMIT thermal safety device has intervened.
Burner lock indicator:
Positioned on the control panel, it consists of a red indicator which comes on when a burner lock
has occurred.
INSTALLATION
INFORMATION
ENGINE ELECTRIC ABSORPTION
To measure the electrical absorption of the appliance motor, proceed as follows:
▪
insert the current probe on a phase of the main supply line;
▪
set the machine for operation in summer mode, so as to exclude all other devices (burner and
auxiliaries);
▪
read the electric absorption value on the current clump and compare it with the data written on
the engine plate.
MAINTENANCE
INFORMATION
MAINTENANCE
▪
Repairs or maintenance must be performed by the Technical Assistance Service or by
qualified personnel.
▪
Disconnect the unit from the main power and fuel supply before any maintenance and /
or inspection work.
▪
In order for the machine to properly work and be maintained, we suggest performing the regular
cleaning and maintenance operations, according to the indications in the following paragraphs.
▪
Cleaning and maintenance interventions must be carried out in relation to the appliance use
conditions, to the installation site and to the environment treated.
▪
Any action to this effect must be carried out safely by qualified personnel and authorized by the
cold appliance without the power supply.
▪
It is recommended that you use personal safety equipment.
▪
All maintenance/cleaning operations requiring the use of ladder or of other means, should be
performed with appropriate and completely safe systems.
▪
It is advisable to prepare a card to report the interventions performed on the appliance (date,
description, type of intervention, cause, etc.).
▪
If you are not going to use the appliance for long periods, place the main switch and the general
one on "off". If long periods of unusual operation occur, it is advisable to contact the Technical
Assistance Service or, in any case, professionally trained personnel to resume operation.
▪
Regularly check that all the screws used to assembly the machine are properly fixed.
For appliances close to areas or under particularly difficult conditions, maintenance
intervals should be more frequent and in any case appropriate to the needs.
Pa
ge.
26
