_______________________________________________________________________________________
_______________________________________________________________________________________
PORT ETHERNET
ZASILANIE, UZIEMIENIE I EKRANOWANIE
Listwa zaciskowa zasilacza przedstawiona jest na poniższym rysunku.
ADNOTACJA: upewnić się, że zasilacz ma wystarczającą moc do obsługi urządzenia.
Urządzenie należy zawsze uziemić za pomocą kabla o minimalnym przekroju 1,5 mm kw. Uziemienie pomaga
ograniczyć wpływ zakłóceń elektromagnetycznych na układ sterowania.
Uziemić również zacisk 3 na bloku zacisków zasilacza. Obwód zasilania może być pływający lub uziemiony.
W tym ostatnim przypadku należy uziemić wspólne źródło zasilania, jak pokazano na rysunku linią przerywaną.
W przypadku korzystania ze schematu zasilania pływającego należy pamiętać, że panele operatorskie łączą
wewnętrznie wspólne zasilanie z masą za pomocą rezystora 1 MΩ równolegle z kondensatorem 4,7 nF.
Zasilacz powinien posiadać podwójną lub wzmocnioną izolację. Wszystkie urządzenia elektroniczne w
syste
mie sterowania muszą być prawidłowo uziemione. Uziemienie należy wykonać zgodnie z
obowiązującymi przepisami.