76
Appendix B - MTS4-outdoor enclosure check list
Introduction
This section provides a check list for installation, service and maintenance of the out-
door enclosure.
Check list
Follow this check list for installation, service and maintenance of the outdoor enclosure:
Check points
Action
1
Has the enclosure been properly secured to the
ground, on a solid and levelled surface
Check
2
Are all gaskets in place and still undamaged
Check
3
Are door handles working properly, closing function
and door alignment
Test
4
Door stop function (lock and release all doors)
Test
5
Lubricate rubber gaskets using a silicone based stick Preventive maintenance
6
Any transport transport/installation damages
Check, repair any dam-
age on paint.
7
Check drain holes in bottom of doors and side pan-
els
Check
8
4 drains in bottom
– one in each corner, is there a fil-
ter in the hole
Check
9
Enclosure heater is switched on before leaving the
site. Check thermostat set point default setting 20ºC
Check
