This Manual uses the following terminologies and abbreviations in connection with the Simplify
Monitoring Control System .
Abbrevia-
tions
Simplify Control Unit
The Control Unit is placed centrally so that
all Sensor Boxes, Integration Boxes and Relay
Boxes have the best possible radio contact .
Simplify Sensor Box
Sensor Box that communicates wirelessly with
the Control Unit .
Simplify Relay Box (on/off)
Up to three connected devices .
Built-in MID (Measuring Instruments Directive)
approved kWh counter .
NOTE! National versions of the Relay Box are
available . If a voltage other than 184-264 VAC
or other plug connections are required:
Contact Dantherm Intelligent Monitoring A/S
for additional information .
Simplify Integration Box CDT
The integration box is installed in a Dantherm
CDT Dehumidifier MKII/III .
The dehumidifier can then be controlled from
the Dashboard .
Simplify Sensor Probe
Sensor Probe that measures temperature and
relative humidity .
Probes are available in the following lengths:
24 cm/300 cm/2 .000 cm .
Simplify App for installation
Smart phone application that is used for scan-
ning and registration of the system .
Supports both iOS and Android .
Simplify Dashboard
Online platform for presentation of data and
generation of reports as well as remote con-
trol of the Integration Box in CDT or a Relay
Box .
CDT
Dantherm CDT Dehumidifier
MKII/III
GSM
Global System for Mobile Com-
munications
DWT
Dew point
Measured in °C .
HUM
Relative humidity
Measured in % .
PDV
Saturated vapour pressure
Vapour pressure is measured in mbar .
WCT
Absolute air humidity
Measured in g/m
3
PWR
Power/Output
Measured in kW .
BAT
Battery voltage of the Sensor
Box
Indicates the battery voltage of the Sensor
Box, measured in Volt .
Technical alarm, CDT
Full water tank, CDT
Alarm for water tank emptying .
System parts and
description
Introduction
: Overview
en
5
