Danuser G20/40 Owner'S Manual Download

Page: 21 / 26

Hole Digger Head Augers have replaceable points and teeth. Flights are replaceable, except on 6".

NOTE

Auger Point PN 9353 is the only auger point that can be used with Hole Digger Heads.

NOTE

Ref.

No.

Part Number by Auger Diameter

Description

No.

Req’d

12"

14"

16"

6121

6122

6123

6124

6125

40" Hole Depth Auger with Double Flight Construction

6014

Retaining Bolt (1/2" 13 x 3-1/4" Gr. 8, 1/2" of thread)

SPECIAL BOLT:

Use Genuine Danuser Replacement Only

1056

Retaining Nut (1/2" 13)

6019

Auger Adapter Replacement (for Field Welding)

AUGER ASSEMBLIES WITH HOLE DIGGER HEADS FOR 2" ROUND SPINDLES

Auger

No. Teeth

Part.

Diameter

per Head

No.

6" . . . . . . . . . . . . . . . . .2 . . . . . . . . . . . . . . .9386
9" . . . . . . . . . . . . . . . . .4 . . . . . . . . . . . . . . .9306

12"  . . . . . . . . . . . . . . . . .4  . . . . . . . . . . . . . . .9308
14"  . . . . . . . . . . . . . . . . .6  . . . . . . . . . . . . . . .9309
16"  . . . . . . . . . . . . . . . . .6  . . . . . . . . . . . . . . .9310

* Includes head with teeth and roll pins, point and point

adapter with tube, for welding to auger center column.

HOLE DIGGER HEAD KIT*

(Field Weld to Auger)

Hole Digger Head Kits can be welded

onto standard augers.

Ref.

Part.

No. Description

No.

Hole Digger Head Point . . . . . . . . . . . . .9353

Hole Digger Head Tooth . . . . . . . . . . . .9234
Hard-Surface Tooth (option) . . . . . . . . .9964

Roll Pin (5/16" x 1-1/4") . . . . . . . . . . . .7483

HOLE DIGGER HEAD REPLACEMENT PARTS

Hole Digger Head

Auger Assemblies

= Safety Sign Location

Summary of Contents for G20/40



























Search results

Summary of Contents for G20/40

Reviews:

Related manuals for G20/40

Brands by name

Popular brands

Danuser G20/40, Owner'S Manual

Search results

Summary of Contents for G20/40

Reviews:

Related manuals for G20/40

Brands by name

Popular brands