background image

 

 

Item # 

OBL-00-008 

Rev. 10-2017 

Copyright ©2017 Danver, Inc. 

 

 

 

WARRANTY: 

DANVER® DOHC Series Range Hood Ventilation Products 

What is Covered: 

Danver, Inc. warrants its DANVER® DOHC Series Range Hood ventilation products to the original user, to be 

free of defects in materials and workmanship for one (1) year from the date of purchase.    

Danver, Inc., at its option, will repair or replace the complete unit or any defective component without 

charge.  This warranty may be voided if any unauthorized service, alterations or repairs are made to 

the product.    

What is Not Covered: 

 

Normal maintenance and service of any product that has been subject to misuse, 

negligence, accident or installation inconsistent with the recommended installation 

instructions. 

 

Product used other than for normal in-home, covered patio use or products used outside of 

the United States. 

 

Damage to the product caused by accident, fire, flood or other acts of God. 

 

Service calls to educate the customer in the proper use and care of the product, correct 

faulty installation, change fuses or reset breakers. 

Danver, Inc. disclaims and excludes any liability for implied warranties or for incidental or consequential 

damages wherever permitted by law.  There are no implied warranties of merchantability or fitness 

for a particular use or purpose.  This warranty gives you specific legal rights and you may also have 

other rights, which vary from state to state.  

For Service: 

If you need service, contact Customer Service at the address or phone number below.  Provide the model 

number, part identification and details of the problem.  Proof of purchase must be provided.  

Warranty Revised 07/24/09  

Danver, Inc. has a policy of continuous improvements and reserves the right to modify (at any time and 

without notice) any or all of its products, features, designs, components and specifications.    Some 

features may be slightly different than shown on product literature. 

For more information, please contact your Danver® Representative 

One Grand Street, Wallingford, CT 06492 

888-441-0537 Toll Free: ext. 100 or 141 

203-269-2300 (CT) 

203-625-6190 FAX 

Sales@danver.com

 

www.danver.com 

Summary of Contents for 1300 CFM DOHC Series













Reviews: