R
www.danvex.fi
9
START-UP AND OPERATION
Description
The control panel is designed to exercise the control functions over the dehumidifier
operation, change of parameters of operation and maintenance of the specified values
for these parameters. The panel consists of control buttons and LCD screen.
Buttons are used for switching on/off and changing of parameters and modes of
operation of the dehumidifier. At the top of the panel screen the current time (if
configured), and operation mode on the basis of the built-in humidity sensor, constant
operation, ventilation mode, current values of humidity and temperature, set/preset
humidity value, the status of the timers and their settings are displayed.
Designation
of
control
buttons
:
(ON/OFF) - on / off of the dehumidifier,
(UP) - increase of the parameter (humidity, time),
(DOWN) - decrease of the parameter (humidity, time),
(MODE) - Change (selection) of the operation mode (built-in humidity
sensor / external humidity sensor / constant dehumidification / ventilation
mode),
(TIME) - setting the timers and time
(TIMERSET) - selection of timer operation mode (off /once /daily)!
Names an values of parameter:
INTERNAL - activated internal / built-in humidity sensor, EXTERNAL -
activated external humidity sensor (have to be connected, in the
absence of contact, error E7 is displayed),
CURRENT HUMIDITY - current/valid humidity,
CURRENT TEMPERATURE - current/actual air temperature,
TIMER ON – time of switching on the dryer when the timer is
operating;
TIMER OFF – time of switching off the dryer when the timer is
operating;
OFF - timers are disabled,
TIME - single cycle of the timer operation;
EVERY DAY - daily mode of the timer operation.
Control panel of the dehumidifier
