www.danvex.fi
1
2
R
Operating the machine
1. Energize the power, the dehumidifier will beep for once;
2. Press the “On/Off” button for once, the LCD display is light. After all the
displays are normal, the LCD displays current environment humidity;
3. Setting of humidity: press “+” and “
－
” buttons to set the required humidity.
When the set humidity is 3% less than current humidity, the dehumidifier works;
when the set humidity is 3% more than current humidity
，
the dehumidifier
stops.
4. When the set humidity is less than 30%, the dehumidifier enters the mode
of successive dehumidification.
5. Setting of preset time:
Press the “Time” button for the first time, the “hour” time on the display
flashes
，
press “+”and“
－
”to adjust the current hour and minute time
；
Press the
“Time” button for the second time
，
the “Start-up time” on the LCD flashes
，
press “+”and“
－
”to adjust the current hour and minute time
；
Press the “Time”
button for the third time
，
the “Stop time” on the LCD flashes
，
Press
“+”and“
－
”to adjust the current hour and time
；
Press the “Time” button for the
forth time
，
the mode of “preset time ”can be canceled.
6. After setting the mode of preset time, if the dehumidifier is shut off, it will
operate the whole mode of preset time; if it is in operation, it will operate the
mode of “preset stop time”.
We do not ensure the efficient operation
of the unit if the room temperature is
below 10 °C and if the relative humidity
is below 40 %.
