R
www.danvex.fi
Unit description
The unit is designed for automated and trouble-free air dehumidification.
The unit operates on condensation principle. It is equipped with a closed loop cooling system,
low noise and low maintenance fan and with a power cable with a plug.
The unit's control panel is equipped with a LCD display used for the system functional checks.
A fully automated unit control system, a trouble-free regulated humidistat, an integrated
overflow system with direct condensation discharge through a flexible hose connection
assure fail safe and long-term operation of the unit.
The unit complies with the fundamental safety and health requirements of the existing EU
regulations.
The unit is easy and safe to operate.
Dehumidifier operation
The fan intakes moist air through air intake grill located at the front of the dehumidifier
equipped with an air filter. Than the air flows through evaporator and condenser located in the
dehumidifier body. While passing through a "cold" evaporator is cooled to below the dew
point. The water vapor contained in the air deposits as condensate or frost on the evaporator
fins in the form of water (frost).
7
Hot heat exchanger
(condenser)
Cold heat exchanger
(evaporator)
Condensate
collection
tray
Tank
Moist air
Dried air
Fan
Compressor
