7
8
12. Install the knobs (
H
) on the door with 1”
bolt (
I
) and on the drawer with 1 ¼” bolts (
Q
)
using a
Phillips screwdriver
.
13. If needed, door hinges can be adjusted for
height and depth by loosening the hinge screws
on the inside and positioning them to the ap-
propriate location.
14. If needed, drawer glides can be adjusted for
height.
Please refer to Homeowner Care Manual for troubleshooting, care and mainte-
nance information.
9. Set the vanity (
A
) back to the intended posi-
tion, aligning holes with anchor positions.
10. Install the wall anchor hardware with a
Phil-
lips screwdriver
in the following order: flat
washer (
S
), plastic washer (
D
), spring washer (
E
),
wood screw (
F
) and metal cap (
G
).
11. Install the Cirtangular™ lavatory according
to the installation instructions provided with
the lavatory. The top of your Cirtangular-
Knightsbridge™ vanity (
A
) features a channel
custom fit for your lavatory to provide a solid
seal and clean, straight lines.
