DAPAudio 800-D MKII, Product Manual

8

      original BPM.

21)

 PITCH 

+

 button: The CD speeds up while this button is pressed. Release the button to return to the

      original BPM.

22)

 PITCH (Pitch-button): Use the button to enable or disable BPM adjustment with the pitch slider. BPM

      adjustment with the pitch slider is enabled when the PITCH LED lights.

23)

 CONTROL START SOCKETS: These sockets are to connect to a mixer using a 3,5mm jack plug to give

      remote start capability. When the switch contacts are shorted the respective unit will play, and similarly
      when the switch contacts are open the player will be in pause mode.

24) 

CONTROL CONNECTOR: Connect this connector to the REMOTE connector on the main unit using the

       included control cord.

LCD
25)

 ~

28)

 TRACK, MINUTE, SECOND, and FRAME Displays: These Displays indicate information for the

               CD’s current position and time.

29)

 BAR-Indicator: These 10 indicators provide a visual display of the approximate position of the pickup

      within the current track.

30)

 ELAPSED-Indicator: This indicates that the time shown on the display is the elapsed time.

31)

 CONTINU- Indicator: When the indicator lights, the function will cause the unit to play continuously.

32)

 SINGLE- Indicator: When the indicator lights, playback will stop at the beginning of the next track.

33)

 REMAIN- Indicator: This indicates that the time shown on the display is the remaining time of the playing

      track.

34)

 PITCH-Display: Display shows the BPM change range, the BPM changes within a range of +/-12%.