background image

 

  

 

 

   

 

Cable Tester Pro 

 

Ordercode: D1909 

IMPORTANT: 

The manufacturer will not accept liability for any resulting damages caused by the non-observance of 
this manual or any unauthorized modification to the system. 
 

 

Batteries are hazardous waste which need to be disposed properly. If the device has to be disposed, 
remove the battery first. 

 

Make sure to connect the poles of the battery correctly. 

 

Never leave batteries lying around openly as there is the danger that these can be swallowed by 
children or domestic animals. Immediately consult a doctor when batteries are swallowed! 

 

Leaking or damaged batteries  can cause irritation when getting into contact with the skin. In case 
of leaking batteries use appropriate protecting gloves for removing them. 

 

Make sure the battery cannot be short-circuited, thrown into fire. Do not attempt to charge the 
battery. In these cases, there is the danger of explosion. 

 

Never spill any liquids on the device. Should any liquid enter the device, remove the battery 
immediately. Let the device check by a qualified technician before you operate it again. Any 
damages caused by liquids having entered the device are not subject to warranty. 

 

Never remove warning or informative labels from the unit. 

 

Never leave any cables lying around. 

 

Do not connect this system to a dimmer pack. 

 

Do not open the device and do not modify the device. 

 

Do not shake the device. Avoid brute force when operating the device. 

 

Only use device indoors, avoid contact with water or other liquids. 

 

Avoid flames and do not put close to flammable liquids or gases. 

 

If device is dropped or struck, disconnect mains power supply immediately. Have a qualified 
engineer inspect for safety before operating. 

 

If the system has been exposed to drastic temperature fluctuation (e.g. after transportation), do not 
switch it on immediately. The arising condensation water might damage your system. Leave the 
system switched off until it has reached room temperature. 

 

If your DAP Audio device fails to work properly, discontinue use immediately. Pack the unit securely 
(preferably in the original packing material), and return it to your DAP Audio dealer for service. 

 

Make sure that the available voltage is not higher than stated on the rear panel. 

 

Make sure you do not use the wrong kind of cables or defective cables. 

 

Repairs, servicing and electric connection must be carried out by a qualified technician. 

 

For replacement use fuses of same type and rating only. 

 

WARRANTY: Till one year after date of purchase. 

 

Operating Determinations 

This system is not designed for permanent operation. Consistent operation breaks will ensure that the 
system will serve you for a long time without defects. 
If this system is operated in any other way, than the one described in this manual, the product may suffer 
damages and the warranty becomes void. 
Any other operation may lead to dangers like short-circuit, burns, electric shock, etc. 

 

You endanger your own safety and the safety of others ! 

 

Improper installation can cause serious injuries to people and/or damage of property ! 

 

Connection with the mains 

Connect the device to the mains with the power-plug. 
Always pay attention, that the right color cable is connected to the right place. 
 

International 

EU Cable 

UK Cable 

US Cable 

Pin 

BROWN

 

RED

 

YELLOW/COPPER

 

FASE

 

BLUE 

BLACK 

SILVER 

NULL 

 

YELLOW/GREEN 

GREEN 

GREEN 

EARTH 

 

Make sure that the device is always connected properly to the earth! 

 

Improper installation can cause serious injuries to people and/or damage of property !

 

 

Summary of Contents for Cable Tester Pro

















Reviews: