DAPAudio COM-AT, Manual

3 

COM-ART 

Ordercode: D1414 

IMPORTANT! 

The manufacturer will not accept liability for any resulting damages caused by the non-observance of 
this manual or any unauthorized modification to the system. 
 
●

Never let the power cord come into contact with other cables! Handle the power cord and all 
connections with the mains with particular caution! 

●

Never remove warning or informative labels from the unit. 

●

Never use anything to cover the ground contact. 

●

Never leave any cables lying around. 

●

Do not open the device and do not modify the device. 

●

Do not connect this device to a dimmer pack. 

●

Do not switch the system on and off in short intervals, as this would reduce the system’s life. 

●

Only use device indoors, avoid contact with water or other liquids. 

●

Avoid flames and do not put close to flammable liquids or gases. 

●

Make sure you do not use the wrong kind of cables or defective cables. 

●

Make sure that the available voltage is not higher than stated on the rear panel.  

●

Make sure that the power cord is never crimped or damaged. Check the system and the power 
cord from time to time. 

●

If system is dropped or struck, disconnect mains power supply immediately. Have a qualified 
engineer inspect for safety before operating. 

●

If the system has been exposed to drastic temperature fluctuation (e.g. after transportation), do not 
switch it on immediately. The arising condensation water might damage your system. Leave the 
system switched off until it has reached room temperature. 

●

If your Dap Audio device fails to work properly, discontinue use immediately. Pack the unit securely 
(preferably in the original packing material) and return it to your Dap Audio dealer for service. 

●

Repairs, servicing and electric connection must be carried out by a qualified technician. 

●

WARRANTY: Till one year after date of purchase. 

Operating Determinations  

●

This device is not designed for permanent operation. Consistent operation breaks will ensure that the 
device will serve you for a long time without defects. 

●

The maximum ambient temperature t

a

 = 40° C must never be exceeded. 

●

The relative humidity must not exceed 50 % with an ambient temperature of 40° C. 

●

If this device is operated in any other way, than the one described in this manual, the product may 
suffer damages and the warranty becomes void. 

●

Any other operation may lead to dangers like short-circuit, burns, electric shock, crash, etc. 

You endanger your own safety and the safety of others!