6
CX Series
CX-500/900/1500/2100/3000
Main operation Key & Functions
Front Panel
Power switch
Use this switch to switch your power amplifier on.
Protection LED
When this indicator lights, the power amplifier is in protection mode. Switch off the
device and find out what the problem is. The power amplifier is protected against
overheat, overload, short circuit, DC.
Limit LED
Any illumination of the clip LED indicates distortion. In this case, check the signal of
your source and turn down the input gain control. Please keep in mind that the
power amplifier cannot correct any distortion.
Signal LED
The illumination of the LED indicates a safe operation.
Rear Panel
Power connection
Plug the matching power cable (included) into this IEC power connector.
Signal input
Connect your sound source XLR plugs. The link socket is used to connect to another
device.
