DAPAudio D1183, Instructions Manual

11 

5. Stop Playback  

There are two ways to stop playback: 
1. Press the 

Play/Pause

 button during playback to pause at that point. 

2. Press the 

Cue

 button during playback to return to the cue point and enter pause condition. 

Fig. 7 

 
 
6. Pausing 

• Press the 

Play/Pause

 button to switch between play and pause. 

• The 

play

 indicator flashes when the pause mode is set. 

• Playback resumes when the 

Play/Pause

 button is pressed again. 

 
7. Setting a Cue Point 

• Press the 

Play/Pause

 button to switch between play and pause. 

• The play indicator flashes when the pause mode is set.

• Turn the 

Shuttle Wheel

 to go to your desired Cue point. 

• Press the 

Play/Pause

 button again and your Cue point has been stored and the CD will continu.

 
8. Cueing 

• "Cueing" is the action of preparing for playback. 
• Press the 

Cue

 button, the player will enter Cue-Mode, the playback returns to cue point and enter  

   pause condition, the Cue indicator lights up and the 

Play

 indicator flashes. When 

Play/Pause

 button is  

   pressed, play starts from the cue point. 
• When the track search operation is completed after pressing the 

Skip

 buttons, the player automatically  

   finds the position at which the sound starts and cues there (Auto Cue). 
• If the 

Cue

 button is pressed after the search operation or the scanning operation, the playback returns  

   to the cue point and enters pause condition. 
 

NOTE

: During cue mode, if the 

Cue

 button is pressed and hold, playback will start from the cue point,  

           when the button is released, the player will return to the cue mode automatically, it allows you to  
           check the cue point. 

 
9. Frame search 

• Frame search is a function for monitoring the sound at a certain section of the disc and manually   
   Changing the position. Searching is used to set a starting point with precision. 
• Turn the 

Shuttle Wheel

 while in pause or cue mode to begin searching. The sound for one revolution of  

   the disc is output repeatedly. The point at which the sound starts is indicated on the LCD. 
• When the 

Shuttle Wheel

 is turned, the point from which the sound output moves is the a number of  

   Frames corresponding to the number of the milliseconds, and the time display on the LCD also  
   changes. 
• The search point moves in the forward direction when the 

Shuttle Wheel

 is turned clockwise. When the  

Shuttle Wheel

 is turned counterclockwise, the search point will moves backward.