6
Set Up and Operation
It is always advisable to use a pop filter (not included) when recording vocals, not only to avoid overly
accentuated ‘S, ‘P’ and ‘B’ sounds, but also to protects the element from moisture (spit). It is always a
good idea to store the microphone in its protection bag when not in use.
Connect the microphone to a mixer or recording device with a high quality XLR cable before turning on
the phantom power. Make sure all volume and gain controls on your mixer, mic preamp or recording
device are at their minimum volume settings when switching the phantom power on.
Once the CM-67 is plugged in and the phantom power is switched on, Move the channel fader
gradually to the 0dB position adjust the input gain using your channel peak led or VU-meter.
Frequency and Polar Diagrams
Summary of Contents for D1366
Page 1: ...CM 67 ORDERCODE D1366...
Page 11: ...2011 Dap Audio...
