9
System Lock Menu
If the receiver is locked, the menu settings (Channels, Sensitivity, Indicator Solution and Power switch)
cannot be changed.
If the receiver is in unlocked status
LOC OFF
, you can change all the menu functions.
Note: Which screen is shown, depends on your previous setup
LOCK OFF to LOCK ON
Scroll through the menu by using the
SET
button, until the LCD shows:
after a second the display shows:
With the
UP
button, you can change the original state from
LOC OFF
to
LOC ON
; the LCD will flash.
Press
SET
to store the setting, the device is locked. After storing (pressing
SET
), the LCD will stop flashing.
LOCK ON to LOCK OFF
If the receiver is in locked status
LOC ON
, you can’t change the current working state and you can’t turn
off the device. The LCD shows:
When the device is in
LOCK
status, press the
SET
button to enter the lock state. Now you can change the
state to
LOCK OFF
by pressing the
DOWN
button, the LCD will keep flashing.
Press
SET
to change the
setting, the device is unlocked. After pressing
SET
, the LCD will stop flashing.
