background image

 

IMPORTANT:

 

The manufacturer will not accept liability for any resulting damages caused by the non-
observance of this manual or any unauthorized modification to the device. 

 

 

Never remove warning or informative labels from the unit. 

 

Never leave any cables lying around. 

 

Do not open the device and do not modify the device. 

 

Do not connect this device to a dimmerpack. 

 

Do not switch the system on and off in short intervals, as this would reduce the system’s life. 

 

Only use device indoor, avoid contact with water or other liquids. 

 

Avoid flames and do not put close to flammable liquids or gases. 

 

Always disconnect power from the mains, when device is not used or before cleaning! Only 
handle the adapter by the plug. Never pull out the adaptor by tugging the cord. 

 

Make sure you don’t use the wrong kind of cables or defective cables. 

 

Make sure that the available voltage is not higher than stated on the rear panel.  

 

Make sure that the power-cord is never crimped or damaged. Check the system and the power-
cord from time to time. 

 

Please turn off the power of all equipment before making connections to other devices.  

 

If system is dropped or struck, disconnect the power adaptor immediately. Have a qualified 
engineer inspect for safety before operating. 

 

If the system has been exposed to drastic temperature fluctuation (e.g. after transportation), do 
not switch it on immediately. The arising condensation water might damage your system. Leave 
the system switched off until it has reached room temperature. 

 

If your Dap Audio device fails to work properly, discontinue use immediately. Pack the unit 
securely (preferably in the original packing material), and return it to your Dap Audio dealer for 
service. 

 

Repairs, servicing and electric connection must be carried out by a qualified technician. 

 

For replacement use fuses of same type and rating only. 

 

 

OPERATING DETERMINATIONS 

 

If this system is operated in any other way, than the one described in this manual, the product may suffer 
damages and the

 

warranty becomes void.  

Any other operation may lead to dangers like short-circuit, burns, electric shock, etc. 
 
You endanger your own safety and the safety of others! 
 
 

Improper installation can cause serious damage to people and property ! 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for D141473





















Reviews: