background image

 

Rearview 

 
 
 

 
 
 
 

 
 
 
 

 

       
Fig. 3 

 

 

 
  7)

 Antenna B

 

  8)

 Channel 4 balanced out 

  9)

 Channel 3 balanced out 

10)

 Channel 3 balanced out 

11)

 Channel 1 balanced out

 

12)

 Mix balanced out: 

       Balanced XLR connector mixes all four channels into a single output

 

13)

 Mix unbalanced out: 

       Unbalanced 1/4” jack plug connector mixes all four channels into a single output 

14)

 Antenna A 

15)

 Power Input Connector 12V 600mA 

16)

 Fan 

 
 
Installation 

Remove all packing materials from the Com-54. Check that all foam and plastic padding is removed. Put 
the 2 antennas into socket A and B at the backside in a vertical angle. Remove the rubber protection 
caps at the underside of the microphones that covers the recharge inputs (See Fig 4).  
 

 Fig. 4

 

 

When connecting the power supplies, assure yourself that the right supplies are connected to the right 
devices. Look at the red/green sticker at the bottom of the microphone. 
 

Always disconnect from electric mains power supply before cleaning or servicing. 
Damages caused by non-observance are not subject to warranty. 

Summary of Contents for D141473





















Reviews: