9
Xi-12B
Ordercode: D3442/D3443
Recommended Speaker Cables
– FS01 jack mono > jack mono, 2 x 1,5mm
2
(1,5 m)
– FS01 jack mono > jack mono, 2 x 1,5mm
2
(3 m)
– FS01 jack mono > jack mono, 2 x 1,5mm
2
(6 m)
– FS01 jack mono > jack mono, 2 x 1,5mm
2
(10 m)
– FS01 jack mono > jack mono, 2 x 1,5mm
2
(15 m)
– FS02 jack mono > XLR/F 3-pin, 2 x 1,5mm
2
(6 m)
– FS02 jack mono > XLR/F 3-pin, 2 x 1,5mm
2
(10 m)
– Neutrik FS16 jack mono > Speakon/M, 2 x 1,5mm
2
(3 m)
– Neutrik FS16 jack mono > Speakon/M, 2 x 1,5mm
2
(6 m)
– Neutrik FS16 jack mono > Speakon/M, 2 x 1,5mm
2
(10 m)
– Neutrik FS16 jack mono > Speakon/M, 2 x 1,5mm
2
(20 m)
Maintenance
The Xi-12B requires almost no maintenance. However, you should keep the unit clean. Disconnect the
mains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid. Do not use
alcohol or solvents.
Keep connections clean. Disconnect electric power, and then wipe the connections with a damp cloth.
Make sure connections are thoroughly dry before linking equipment or supplying electric power.
Troubleshooting
This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps
below in sequence until a solution is found. Once the unit operates properly, do not carry out following
steps.
01)
If the device does not operate properly, unplug the device.
02)
Check the power from the wall, all cables, etc.
03)
If all of the above appears to be O.K., plug the unit in again.
04)
If you are unable to determine the cause of the problem, do not open the Xi-12B, as this may
damage the unit and the warranty will become void.
05)
Return the device to your Dap Audio dealer.
Product Specifications
Impedance:
4 Ω
Continuous power:
300W
Program power:
600W
Peak power:
900W
Components:
12” woofer with 2,5” VC
Frequency response (processed):
42-150 Hz
Frequency response (flat, -10dB):
42-2800 Hz
Recommended HPF:
42Hz, BW-24
Recommended LPF:
150Hz, LR-24
Sensitivity (full space):
99dB/W/m
Peak SPL @1m:
125dB
Normal dispersion (HxV):
360° x 180°
Connectors:
Speakon IN/THRU, 4-pin terminal block IN/OUT
Housing:
Birch Plywood, resistant black finish
Color:
Black (D3442), White (D3443)
Dimensions:
540 x 350 x 513 mm (LxWxH)
Weight:
18,3 kg
Design and product specifications are subject to change without prior notice.
Summary of Contents for D3442
Page 11: ...10 Xi 12B Ordercode D3442 D3443 Dimensions...
Page 12: ...2018 DAP Audio...
