8
Pure-18S Passive 18” Subwoofer
Order code: D3744
Setup and Operation
Follow the directions below, as they pertain to your preferred operation mode.
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 110 V specification product on 230 V power, or vice versa.
Make your initial connections with all the equipment powered off and ensure that all the main volume
controls are turned completely to the minimum. Follow the steps below.
01)
Connect the speakers to each other, using Speakon cables.
02)
Make sure that the low-pass filter (05) is set to ON and phase invert (04) is set to the same direction
for all subwoofer cabinets!
03)
Connect your mixer to the amplifier.
04)
Connect power supply to the mixer and the amplifier.
Connection Example 1 (2 x Pure-10/Pure-12/Pure-15 and 2 x Pure-15S/Pure-18S)
Fig. 04
