13
Maintenance
The
DAP DS-610
requires almost no maintenance. However, you should keep the unit clean. Disconnect
the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid. Do not
use alcohol or solvents.
Keep connections clean. Disconnect electric power, and then wipe the audio connections with a damp
cloth. Make sure connections are thoroughly dry before linking equipment or supplying electric power.
Troubleshooting
DAP DS-610
This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps
below in sequence until a solution is found. Once the unit operates properly, do not carry out following
steps.
1.
If the device does not operate properly, unplug the device.
2.
Check power from the wall, all cables, connections, etc.
3.
If all of the above appears to be O.K., plug the unit in again.
4.
If nothing happens after 30 seconds, unplug the device.
5.
Return the device to your DAP Audio dealer.
Product Specification
Power supply: AC 80-260 V - 50/60 Hz
Power consumption: 5 Watt
Pitch control: 24% +/-
S/N ratio: >96 dB
Frequency response: 20 Hz - 20 kHz
Headphone connector: 6,3 mm jack
Audio output: Stereo RCA unbalanced
Dimensions: 482 x 45 x 260 mm (LxWxH)
Weight: 2,75 kg
Design and product specifications are subject to change without prior notice.
Summary of Contents for DS-610
Page 1: ...DS 610 ORDERCODE D1128...
Page 16: ...2009 DapAudio...
