DAPAudio DS-TT-750-USB Manual Download

Page: 13 / 17

Using the Audacity Software Quick start

Audacity is free software, licensed under the GNU General Public License (GPL). More information as well
as open source code can be found on the web at

http://audacity.sourceforge.net/

Note: Please ensure you have installed the software before

Setting up your PC to work with Audacity

1. Connect an input source to the unit

2. Connect the USB lead to your computer

3. Install the Audacity recording software

4. Open the Audacity program

5. Select Preferences from the Edit tab in the Audacity menu.

Fig. 4

6. Select

Audio I/O

tab at the top left

Under Playback, device select your internal sound card

Under recording, device, select

USB Audio Codec

Under recording, channels, select

2 (Stereo)

Check the box marked

Play other tracks while recording new one

Check the box marked

Software Playthrough

Fig. 5

Summary of Contents for DS-TT-750-USB


















Search results

Summary of Contents for DS-TT-750-USB

Reviews:

Related manuals for DS-TT-750-USB

Brands by name

Popular brands

DAPAudio DS-TT-750-USB, Manual

Search results

Summary of Contents for DS-TT-750-USB

Reviews:

Related manuals for DS-TT-750-USB

Brands by name

Popular brands