32
EDGE EHS-1
Product code: D1475B
Gain
In this menu you can set the gain of the transmitter.
Press the UP/DOWN buttons (25/20) to select GAIN.
Press the SET button (24) to edit.
Press the UP/DOWN buttons (25/20) to set the desired gain. The adjustment range is from -32 dB to
+4 dB.
Press the SET button (24) to confirm.
RF Output Power
In this menu you can set the RF output power.
Press the UP/DOWN buttons (25/20) to select RF POWER:
Press the SET button (24) to edit.
Press the UP/DOWN buttons (25/20) to select one of the 3 options:
●
LOW (10 mW)
●
MID (20 mW)
●
HIGH (30 mW)
Press the SET button (24) to confirm.
Note:
The maximum allowed RF output power differs per country and region. Consult the respective national
and/or regional authority as licensing or specific restrictions may apply for the use of the device. We do
not take any responsibility in case the device cannot operate or cannot be used in your country/region
or if it requires additional licensing. Before using the device, check the maximum allowed RF output
power in your country or region.
Summary of Contents for EDGE EHS-1
Page 13: ...12 EDGE EHS 1 Product code D1475B Dimensions Fig 05...
Page 39: ...38 EDGE EHS 1 Product code D1475B...
Page 40: ...2023 DAP...